Material: All parts to be made from prime grade mild cold rolled sheet steel (unless indicated otherwise) free from surface imperfections and capable of taking on a powder coat finish

 

Finish: Steel shall be cleaned with phosphatizing and metal preparation process. Finish coat shall be baked on powder coat enamel with 2-3 mil minimum of thickness. Color to be selected from manufacturers standard offering. All lockers are painted inside and out with the same color

 

Construction: Lockers shall be all-welded construction, welded into banks of multiple lockers sharing common backs, tops and bottoms.

welding of knock down style lockers is not acceptable.

​

Door Frame: The locker sides, tops, bottoms, and tier dividers are to be formed, creating the door frame with continuous 4-sided door strike. The side panel and vertical frame member shall be a single piece, eliminating seams. Lockers without 4 sided door strike shall not be acceptable. Intermediate frame members of two and three tier lockers shall be securely welded to the vertical frame members.

​

Doors: All doors to be formed from one piece 14 gauge steel with a single return at the top and bottom, double return on the sides to form a channel. Channel to be sufficient to fully conceal the lock bar. An 18 gauge full height door stiffener, welded to the inside of the door on the hinge side shall be provided on all doors 20" and higher.

​

Vents: Diamond Perforation (other venting options are available)

​

Latch: Provide handles recessed in door with finger lift control. Latch system contains a lock bar installed inside the formed channel of the door. For doors 42" high or greater, lock bar secures door closed via contact with 3 heavy gauge steel latch hooks. Doors that are less than 42" utilize 2 latch hooks. Latch hooks shall be securely welded to the vertical frame channel. Nylon guides and clips prevent metal to metal contact for a quieter operation. Lock bar shall connect to 14 gauge steel lift piece with one secure retaining lug and one rivet, assuring positive 2 point connection. The exposed portion of the finger lift shall be encased in molded ABS thermoplastic to prevent metal to metal contact. Latch system shall accept either a padlock or built-in combination style lock. Box Lockers are equipped with a single point style latch if it is 4 tiers and above.

(Optional) Single point latch is optional on all lockers. An 11 gauge steel hook shall be securely welded to the vertical frame member. Frame hook will have a padlock hasp that protrudes through the stainless steel recessed handle. The frame hook shall be designed to accept the Masterlock 1690 built-in combination lock. Or 3 point/3 side cremone turn handle latch mechanism

​

Body: All locker body components shall be made of 16 gauge cold rolled mild steel, specifically formed for added strength and rigidity. The front edge of the shelf shall have a double return flange. Tops and bottoms of lockers shall be one piece, continuous within each group of lockers. 

​

Hinges: 16 gauge steel continuous piano hinge